Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

This page shows the current agreement on the design time information model of resources for ONAP R2.

NOTE: Differences with ETSI IFA011 v2.3.2 (draft) are marked in orange.

Table of Contents
printablefalse

Class: VNFD/VNFDesc

...

Identifier of this VNFD information element. This attribute shall be globally unique.

NOTE: The VNFD Identifier shall be used as the unique identifier of the VNF Package that contains this VNFD.

...

support: MANDATORY

valueRange: use the name of micro-service of the vnfm drive. For vendor specific VNFM, the value composes of "vendorname" and "vnfmdriver", e.g. "mycompanyvnfmdriver"; for generic VNFM, the value is "gvnfmdriver".

...

Information about localization languages of the VNF (includes e.g. strings in the VNFD).

NOTE: This allows to provide one or more localization languages to support selecting a specific localization language at VNF instantiation time.

...

support: MANDATORY

valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html

...

Default localization language that is instantiated if no information about selected localization language is available.

...

support: MANDATORY

valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html

condition: Shall be present if "localizationLanguage" is present and shall be absent otherwise.

...

Describes the modifiable attributes of the VNF.

Editor's note: need check the usage of this attribute

...

Class: VDU/VDUDesc

...

Unique identifier of this Vdu in VNFD.

...

Boot order of valid boot devices.

NOTE: If no boot order is defined the default boot order defined in the VIM or NFVI shall be used.

...

support: MANDATORY

valueRange: "key/name" indicates the the boot index (lowest index defines highest boot priority). "value" references a descriptor from which a valid boot device is created e.g. VirtualStorageDesc from which a VirtualStorage instance is created.

...

0..1

Editor's note: the scenario of using "0" needs to be clarified.

...

Describes the software image which is directly loaded on the virtualisation container realising this Vdu.

NOTE: More software images can be attached to the virtualisation container using VirtualStorage resources.

...

Describes constraints on the NFVI for the VNFC instance(s) created from this Vdu. For example, aspects of a secure hosting environment for the VNFC instance that involve additional entities or processes.

NOTE: These are constraints other than stipulating that a VNFC instance has access to a certain resource, as a prerequisite to instantiation. The attributes virtualComputeDesc and virtualStorageDesc define the resources required for instantiation of the VNFC instance.

...

support: MANDATORY

valueRange: "key/name" includes "AvailabilityZone", "HostAggregates".

...

This page shows the current agreement on the design time information model of resources for ONAP R2.

NOTE: Differences with ETSI IFA011 v2.3.2 (draft) are marked in orange.

Table of Contents
printablefalse

Class: VNFD/VNFDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
vnfdIdIdentifier1

Identifier of this VNFD information element. This attribute shall be globally unique.

NOTE: The VNFD Identifier shall be used as the unique identifier of the VNF Package that contains this VNFD.

Any modification of the content of the VNFD or the VNF Package shall result in a new VNFD Identifier.
support: MANDATORY
vnfProviderString1Provider of the VNF and of the VNFD.support: MANDATORY
vnfProductNameString1Name to identify the VNF Product. Invariant for the VNF Product lifetime.support: MANDATORY
vnfSoftwareVersionString1Software version of the VNF. This is changed when there is any change to the software that is included in the VNF Package.support: MANDATORY
vnfdVersionString1Identifies the version of the VNFD.support: MANDATORY
vnfProductInfoNameString0..1Human readable name for the VNF Product. Can change during the VNF Product lifetime.support: MANDATORY
vnfProductInfoDescriptionString0..1Human readable description of the VNF Product. Can change during the VNF Product lifetime.support: MANDATORY
vnfmInfoString0..NIdentifies VNFM(s) compatible with the VNF described in this version of the VNFD.

support: MANDATORY

valueRange: use the name of micro-service of the vnfm drive. For vendor specific VNFM, the value composes of "vendorname" and "vnfmdriver", e.g. "mycompanyvnfmdriver"; for generic VNFM, the value is "gvnfmdriver".

localizationLanguageString0..N

Information about localization languages of the VNF (includes e.g. strings in the VNFD).

NOTE: This allows to provide one or more localization languages to support selecting a specific localization language at VNF instantiation time.


support: MANDATORY

valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html

defaultLocalizationLanguageString0..1

Default localization language that is instantiated if no information about selected localization language is available.

support: MANDATORY

valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html

condition: Shall be present if "localizationLanguage" is present and shall be absent otherwise.

vduVDU/VDUDesc1..NVirtualisation Deployment Unit.support: MANDATORY
virtualComputeDescVirtualComputeDesc1..NDefines descriptors of virtual compute resources to be used by the VNF.support: MANDATORY
virtualStorageDescVirtualStorageDesc0..NDefines descriptors of virtual storage resources to be used by the VNF.support: MANDATORY
intVirtualLinkDescVirtualLinkDesc/VnfVirtualLinkDesc0..NRepresents the type of network connectivity mandated by the VNF provider between two or more CPs which includes at least one internal CP.support: MANDATORY
vnfReservedCpdVduCpd0..NReserved IP Address for VNF which is not bounded to any specific VNFC, but assigned manually from outside and potentially shared as a floating IP among VNFCs.support: MANDATORY
vnfExtCpdVnfExtCpd/VNFExtCPDesc1..NDescribes external interface(s) exposed by this VNF enabling connection with a VL.support: MANDATORY
deploymentFlavourVnfDf/VNFDeploymentFlavor1..NDescribes specific DF(s) of a VNF with specific requirements for capacity and performance.support: MANDATORY
configurablePropertiesVnfConfigurableProperties0..1Describes the configurable properties of the VNF (e.g. related to auto scaling and auto healing).support: MANDATORY
modifiableAttributesVnfInfoModifiableAttributes0..1

Describes the modifiable attributes of the VNF.

Editor's note: need check the usage of this attribute

support: MANDATORY
lifeCycleManagementScriptLifeCycleManagementScript/LifeCycleManagementOperationDesc0..NIncludes a list of events and corresponding management scripts performed for the VNF.support: MANDATORY
elementGroupVnfdElementGroup0..NDescribes the associated elements of a VNFD for a certain purpose during VNF lifecycle management.support: MANDATORY
vnfIndicatorVnfIndicator0..NDeclares the VNF indicators that are supported by this VNF.support: MANDATORY
logoString0..1File path of the vendor specified logo.support: MANDATORY
guideString0..1UUID of the vendor guide/documentation which is attached to VNF and can be downloaded from the model.support: MANDATORY





Class: VDU/VDUDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
vduIdIdentifier1

Unique identifier of this Vdu in VNFD.

support: MANDATORY
nameString1Human readable name of the Vdu.support: MANDATORY
descriptionString1Human readable description of the Vdu.support: MANDATORY
vduCpdVduCpd/VDUCPDesc1..NDescribes network connectivity between a VNFC instance (based on this Vdu) and an Virtual Link (VL).support: MANDATORY
virtualComputeDescIdentifier (reference to VirtualComputeDesc)1Describes CPU, Memory and acceleration requirements of the Virtualisation Container realising this Vdu.support: MANDATORY
virtualStorageDescIdentifier (reference to VirtualStorageDesc)0..NDescribes storage requirements for a VirtualStorage instance attached to the virtualisation container created from virtualComputeDesc defined for this Vdu.support: MANDATORY
bootOrderKeyValuePair/NameValuePair0..N

Boot order of valid boot devices.

NOTE: If no boot order is defined the default boot order defined in the VIM or NFVI shall be used.

support: MANDATORY

valueRange: "key/name" indicates the the boot index (lowest index defines highest boot priority). "value" references a descriptor from which a valid boot device is created e.g. VirtualStorageDesc from which a VirtualStorage instance is created.

swImageDescSwImageDesc

0..1

Editor's note: the scenario of using "0" needs to be clarified.

Describes the software image which is directly loaded on the virtualisation container realising this Vdu.

NOTE: More software images can be attached to the virtualisation container using VirtualStorage resources.

support: MANDATORY
nfviConstraintKeyValuePair/NameValuePair0..N

Describes constraints on the NFVI for the VNFC instance(s) created from this Vdu. For example, aspects of a secure hosting environment for the VNFC instance that involve additional entities or processes.

NOTE: These are constraints other than stipulating that a VNFC instance has access to a certain resource, as a prerequisite to instantiation. The attributes virtualComputeDesc and virtualStorageDesc define the resources required for instantiation of the VNFC instance.

support: MANDATORY

valueRange: "key/name" includes "AvailabilityZone", "HostAggregates".

monitoringParameterMonitoringParameter0..NDefines the virtualised resources monitoring parameters on VDU level.support: MANDATORY
configurablePropertiesVnfcConfigurableProperties1Describes the configurable properties of all VNFC instances based on this VDU.support: MANDATORY
injectFilesString0..NDescribes the information (e.g. URL) about the scripts, config drive metadata, etc. which can be used during Vdu booting process.support: MANDATORY





Class: SwImageDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
idIdentifier1The identifier of this software image.support: MANDATORY
nameString1The name of this software image.support: MANDATORY
versionString1The version of this software image.support: MANDATORY
checksumString1The checksum of the software image file.support: MANDATORY
containerFormatString1The container format describes the container file format in which software image is provided.support: MANDATORY
diskFormatString1The disk format of a software image is the format of the underlying disk image.support: MANDATORY
minDiskNumber (recommended DM type: Scalar-Unit-Size)1The minimal disk size requirement for this software image. The value of the "size of storage" attribute of the VirtualStorageDesc referencing this SwImageDesc shall not be smaller than the value of minDisk.support: MANDATORY
minRamNumber (recommended DM type: Scalar-Unit-Size)0..1The minimal RAM requirement for this software image. The value of the "size" attribute of VirtualMemoryData of the Vdu referencing this SwImageDesc shall not be smaller than the value of minRam.support: MANDATORY
sizeNumber (recommended DM type: Scalar-Unit-Size)1The size of this software image.support: MANDATORY

swImage

Identifier (Reference to a SwImage)1This is a reference to the actual software image. The reference can be relative to the root of the VNF Package or can be a URL.support: MANDATORY
operatingSystemString0..1

Identifies the operating system used in the software image. This attribute may also identify if a 32 bit or 64 bit software image is used.

support: MANDATORY
supportedVirtualisationEnvironmentString0..NIdentifies the virtualisation environments (e.g. hypervisor) compatible with this software image.support: MANDATORY

Class: VirtualComputeDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
virtualComputeDescIdIdentifier1Unique identifier of this VirtualComputeDesc in the VNFD.support: MANDATORY
logicalNodeLogicalNodeData/LogicialNodeDesc1..NThe logical Node requirements.support: MANDATORY
requestAdditionalCapabilitiesRequestedAdditionalCapabilityData0..NSpecifies requirements for additional capabilities. These may be for a range of purposes. One example is acceleration related capabilities.support: MANDATORY
computeRequirementsKeyValuePair/NameValuePair0..NSpecifies compute requirements.support: MANDATORY
virtualMemoryVirtualMemoryData/VirtualMemoryDesc1The virtual memory of the virtualised compute.support: MANDATORY
virtualCpuVirtualCpuData/VirtualCPUDesc1The virtual CPU(s) of the virtualised compute.support: MANDATORY

Class: VirtualCpuData/VirtualCPUDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
cpuArchitectureString0..1CPU architecture type. Examples are x86, ARM. The cardinality can be 0 during the allocation request, if no particular CPU architecture type is requested.support: MANDATORY
numVirtualCpuInteger1Number of virtual CPUs.support: MANDATORY
virtualCpuClockNumber(recommended DM type: Scalar-Unit-Freq)0..1Minimum virtual CPU clock rate (e.g. in MHz). The cardinality can be 0 during the allocation request, if no particular value is requested.support: MANDATORY
virtualCpuOversubscriptionPolicyString0..1The CPU core oversubscription policy e.g. the relation of virtual CPU cores to physical CPU cores/threads. The cardinality can be 0 during the allocation request, if no particular value is requested.support: MANDATORY
vduCpuRequirementsKeyValuePair/NameValuePair0..NArray of key-value pair requirements on the Compute (CPU) for the VDU.support: MANDATORY
virtualCpuPinningVirtualCpuPinningData0..1The virtual CPU pinning configuration for the virtualised compute resource.

support: MANDATORY

editor's note: need to check whether can be optional

Class: VirtualMemoryData/VirtualMemoryDesc

The version of this software image
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
idIdentifiervirtualMemSizeNumber (recommended DM type: Scalar-Unit-Size)1The identifier of this software imageAmount of virtual Memory (e.g. in MB).support: MANDATORY
namevirtualMemOversubscriptionPolicyString0..1The name of this software imagememory core oversubscription policy in terms of virtual memory to physical memory on the platform. The cardinality can be 0 during the allocation request, if no particular value is requested.support: MANDATORYversion
vduMemRequirementsString1KeyValuePair/NameValuePair0..NArray of key-value pair requirements on the memory for the VDU.support: MANDATORY
checksumnumaEnabledStringBoolean
0..1The checksum of the software image file.support: MANDATORYcontainerFormatString1The container format describes the container file format in which software image is provided

It specifies the memory allocation to be cognisant of the relevant process/core allocation. The cardinality can be 0 during the allocation request, if no particular value is requested.

support: MANDATORY
diskFormatString1The disk format of a software image is the format of the underlying disk image.support: MANDATORY
minDiskNumber (recommended DM type: Scalar-Unit-Size)1The minimal disk size requirement for this software image. The value of the "size of storage" attribute of the VirtualStorageDesc referencing this SwImageDesc shall not be smaller than the value of minDisk

Class: VirtualStorageDesc

The minimal RAM requirement for this software image. The value of the "size" attribute of VirtualMemoryData of the Vdu referencing this SwImageDesc shall not be smaller than the value of minRamIdentifies the virtualisation environments (e.g. hypervisor) compatible with this software image
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

id

Identifier

1

Unique identifier of this VirtualStorageDesc in the VNFD.

support: MANDATORYminRamNumber (recommended DM type: Scalar-Unit-Size)0..1

typeOfStorage

String

1

Type of virtualised storage resource
(e.g. volume, object).

support: MANDATORY
size

sizeOfStorage

Number (recommended DM type: Scalar-Unit-Size)

1

The size of this software image

Size of virtualised storage resource
(e.g. size of volume, in GB).

support: MANDATORY

vduStorageRequirements

KeyValuePair/NameValuePair

0..N

An array of key-value pairs that articulate the storage deployment requirements.

support: MANDATORY

rdmaEnabled

Boolean

0..1

Indicate if the storage support RDMA.

support: MANDATORY
swImage

swImageDesc

Identifier (Reference to

a SwImage

SwImageDesc)

0..1

This is a reference to the actual software image. The reference can be relative to the root of the VNF Package or can be a
URL

Software image to be loaded on the VirtualStorage resource created based on this VirtualStorageDesc.

support: MANDATORY

operatingSystemString0..1

Identifies the operating system used in the software image. This attribute may also identify if a 32 bit or 64 bit software image is used.

support: MANDATORY
supportedVirtualisationEnvironmentString0..N

Class: LogicalNodeData/LogicalNodeDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

logicalNodeRequirements

KeyValuePair/NameValuePair

0..N

The logical node-level compute, memory and I/O requirements. An array of key-value pairs that articulate the deployment requirements.

This could include the number of CPU cores on this logical node, a memory configuration specific to a logical node (e.g. such as available in the Linux kernel via the libnuma library) or a requirement related to the association of an I/O device with the logical node.

support: MANDATORY

Class:

...

Cpd/CPDesc

Specifies requirements for additional capabilities. These may be for a range of purposes. One example is acceleration related capabilities
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
virtualComputeDescId

cpdId

Identifier

1

Unique identifier

Identifier of this

VirtualComputeDesc in the VNFD

Cpd information element.

support: MANDATORY
logicalNode

cpRole

LogicalNodeData/LogicialNodeDesc

String

1

0..

N
The logical Node requirements.support: MANDATORYrequestAdditionalCapabilitiesRequestedAdditionalCapabilityData0..N

1

Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS.

For example a VNF with a tree flow pattern within the VNF will have legal cpRoles of ROOT and LEAF.

support: MANDATORY
computeRequirements

description

KeyValuePair/NameValuePair

String

0..

NSpecifies compute requirements

1

Provides human-readable information on the purpose of the CP (e.g. CP for control plane traffic).

support: MANDATORY
virtualMemory

cpProtocol

VirtualMemoryData/VirtualMemoryDesc

CpProtocolData

1

The virtual memory of the virtualised compute.support: MANDATORYvirtualCpuVirtualCpuData/VirtualCPUDesc1The virtual CPU(s) of the virtualised compute

..N

Identifies the protocol layering information the CP uses for connectivity purposes and associated information. There shall be one cpProtocol for each layer protocol as indicated by the attribute layerProtocol.

Editor's note: the attribute "layerProtocol" still needs further discussion and not included in this table.

support: MANDATORY

Class: VirtualCpuData/VirtualCPUDesc

String1CPU architecture type. Examples are x86, ARM. The cardinality can be 0 during the allocation request, if no particular CPU architecture type is requested
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
cpuArchitecture

trunkMode

Boolean

1

Information about whether the CP instantiated from this CPD is in Trunk mode (802.1Q or other).

support: MANDATORY

allowedAddressData

AddressData

0..

N

For specifying floating IP(s) to be shared among Cpds, which are reserved for vnfReservedCpd described in the VNFD.

support: MANDATORY

numVirtualCpuInteger1Number of virtual CPUs.support: MANDATORY
virtualCpuClock

Class: VduCpd/VDUCPDesc

Freq)Minimum virtual CPU clock rate ( in MHz). The cardinality can be 0 during the allocation request, if no particular value is requested
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

bitrateRequirement

Number (recommended DM type: Scalar-Unit-

Rate)

0..1

Bitrate requirement on this CP.

support: MANDATORY

vnicName

String

0..1

Describes the name of the vNIC this CP attaches to, e.g.

eth0. It will be configured during the Vdu booting process.

support: MANDATORY
virtualCpuOversubscriptionPolicy

vnicOrder

String

Integer

0..1

The CPU core oversubscription policy e.g. the relation of virtual CPU cores to physical CPU cores/threads. The cardinality can be 0 during the allocation request, if no particular value is
requested

Describes the order to create the vNIC within the scope of this Vdu.

support: MANDATORY
vduCpuRequirements

vnicType

KeyValuePair/NameValuePair

Enum

0..

N

1

Array of key-value pair requirements on the Compute (CPU) for the VDU

Describes the type of the vNIC this CP attaches to.

support: MANDATORY

virtualCpuPinningVirtualCpuPinningData

valueRange: normal, macvtap, direct, baremetal, direct-physical and virtio-forwarder

virtualNetworkInterfaceRequirementsVirtualNetworkInterfaceRequirements0..1The virtual CPU pinning configuration for the virtualised compute resourceNSpecifies requirements on a virtual network interface realising the CPs instantiated from this CPD.support: MANDATORYeditor's note: need to check whether can be optional
(inherited attributes)

All attributes inherited from Cpd.

Class:

...

VnfExtCpd/

...

VnfExtCpDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
virtualMemSize

intCpd

Number (recommended DM type: Scalar-Unit-Size)1Amount of virtual Memory (e.g. in MB).support: MANDATORYvirtualMemOversubscriptionPolicyString

Identifier (Reference to VduCpd)

0..1

The memory core oversubscription policy in terms of virtual memory to physical memory on the platform. The cardinality can be 0 during the allocation request, if no particular value is requested

Reference to the internal VDU CPD which is used to instantiate internal CPs. These internal CPs are, in turn, exposed as external CPs defined by this external CPD.

support: MANDATORY
vduMemRequirements
virtualNetworkInterfaceRequirements
KeyValuePair/NameValuePair
VirtualNetworkInterfaceRequirements0..N
Array of key-value pair

Specifies requirements on

the memory for the VDU.support: MANDATORYnumaEnabledBoolean
0..1It specifies the memory allocation to be cognisant of the relevant process/core allocation. The cardinality can be 0 during the allocation request, if no particular value is requested

a virtual network interface realising the CPs instantiated from this CPD.

NOTE: In case of referencing an intCpd via its identifier, the virtualNetworkInterfaceRequirements attribute of the referenced intCpd applies.

support: MANDATORY

(inherited attributes)

All attributes inherited from Cpd.

Class:

...

VduProfile

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

idvduId

Identifier (Reference to Vdu)

1Unique

identifier of this VirtualStorageDesc in the VNFDUniquely identifies a VDU.

support: MANDATORY

typeOfStorageminNumberOfInstances

StringInteger

1Type of virtualised storage resource
(e.g. volume, object)

Minimum number of instances of the VNFC based on this VDU that is permitted to exist for this flavour.

support: MANDATORY

sizeOfStorage

Number (recommended DM type: Scalar-Unit-Size)maxNumberOfInstances

Integer

1Size of virtualised storage resource
(e.g. size of volume, in GB

)Maximum number of instances of the VNFC based on this VDU that is permitted to exist for this flavour.

support: MANDATORY

vduStorageRequirementslocalAffinityOrAntiAffinityRule

KeyValuePair/NameValuePairLocalAffinityOrAntiAffinityRule

0..N

An array of key-value pairs that articulate the storage deployment requirements.

support: MANDATORY

rdmaEnabled

Boolean

0..1

Indicate if the storage support RDMA.

support: MANDATORY

swImageDesc

Identifier (Reference to SwImageDesc)

0..1

Software image to be loaded on the VirtualStorage resource created based on this VirtualStorageDesc.

support: MANDATORY

Class: LogicalNodeData/LogicalNodeDesc

...

logicalNodeRequirements

...

KeyValuePair/NameValuePair

...

0..N

...

The logical node-level compute, memory and I/O requirements. An array of key-value pairs that articulate the deployment requirements.

This could include the number of CPU cores on this logical node, a memory configuration specific to a logical node (e.g. such as available in the Linux kernel via the libnuma library) or a requirement related to the association of an I/O device with the logical node.

...

Class: Cpd/CPDesc

cpRole

Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS.

For example a VNF with a tree flow pattern within the VNF will have legal cpRoles of ROOT and LEAF
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

cpdId

Identifier

1

Identifier of this Cpd information element.

support: MANDATORY

Specifies affinity or anti-affinity rules applicable between the virtualisation containers (e.g. virtual machines) to be created based on this VDU.

When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes (e.g. "Affinity with the scope resource zone and anti-affinity with the scope NFVI node") are applicable to the virtualisation containers (e.g. virtual machines) to be created based on this VDU.

support: MANDATORY

affinityOrAntiAffinityGroupIdIdentifier0..N

Identifier(s) of the affinity or anti-affinity group(s) the VDU belongs to.

NOTE: Each identifier references an affinity or anti-affinity group which expresses affinity or anti-affinity relationships between the virtualisation container(s) (e.g. virtual machine(s)) to be created using this VDU and the virtualisation container(s) (e.g. virtual machine(s)) to be created using other VDU(s) in the same group.

support: MANDATORY
watchdogString0..1Watchdog action to be triggered by the VIM for the VNF in case the heart beat fails, e.g. reset or hard shutdown, etc.support: MANDATORY
descriptionvmBootUpTimeOutStringInteger0..1

Provides human-readable information on the purpose of the CP (e.g. CP for control plane traffic).

support: MANDATORY

cpProtocol

CpProtocolData

1..N

Identifies the protocol layering information the CP uses for connectivity purposes and associated information. There shall be one cpProtocol for each layer protocol as indicated by the attribute layerProtocol.

Editor's note: the attribute "layerProtocol" still needs further discussion and not included in this tableTimeout value for the VNFM to wait before the successful booting up of the VDU.
support: OPTIONAL

Class: VirtualNetworkInterfaceRequirements

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

name

String

0..1

Provides a human readable name for the requirement.

support: MANDATORY

description

String

0..1

Provides a human readable description of the requirement.

support: MANDATORY
trunkModesupportMandatoryBoolean1Information about Indicates whether fulfilling the CP instantiated from this CPD is in Trunk mode (802.1Q or otherconstraint is mandatory (TRUE) for successful operation or desirable (FALSE).support: MANDATORY
allowedAddressDatanetworkInterfaceRequirementsAddressDataKeyValuePair/NameValuePair0..NFor specifying floating IP(s) to be shared among Cpds, which are reserved for vnfReservedCpd described in the VNFDThe network interface requirements. An element from an array of key-value pairs that articulate the network interface deployment requirements.support: MANDATORY

Class:

...

VnfVirtualLinkDesc

String01 the name of the vNIC this CP attaches to, e.g. eth0. It will be configured during the Vdu booting process.
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

bitrateRequirement

Number (recommended DM type: Scalar-Unit-Rate)

0..1

Bitrate requirement on this CPvirtualLinkDescId

Identifier

1

Unique identifier of this internal VLD in VNFD.

support: MANDATORYvnicName
virtualLinkDescFlavourVirtualLinkDescFlavour1..NDescribes a specific flavour of the VL with specific bitrate requirements.support: MANDATORY
connectivityTypeConnectivityType1
support: MANDATORY

vnicOrder

Integer

0..1

Describes the order to create the vNIC within the scope of this Vdu
testAccessString0..NSpecifies test access facilities expected on the VL (e.g. none, passive monitoring, or active (intrusive) loopbacks at endpoints).support: MANDATORY
vnicTypedescriptionEnumString0..1

Describes the type of the vNIC this CP attaches to.

support: MANDATORY

valueRange: normal, macvtap, direct, baremetal, direct-physical and virtio-forwarder

virtualNetworkInterfaceRequirementsVirtualNetworkInterfaceRequirementsProvides human-readable information on the purpose of the VL (e.g. control plane traffic).support: MANDATORY
monitoringParameterMonitoringParameter0..NSpecifies requirements on a virtual network interface realising the CPs instantiated from this CPD.Defines the virtualised resources monitoring parameters on VLD level. support: MANDATORY(inherited attributes)All attributes inherited from Cpd.

Class:

...

VnfDf

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes
intCpd

flavorId

Identifier

(Reference to VduCpd)

0..1

Reference to the internal VDU CPD which is used to instantiate internal CPs. These internal CPs are, in turn, exposed as external CPs defined by this external CPD

1

Identifier of this DF within the VNFD.

support: MANDATORY
virtualNetworkInterfaceRequirements
description
VirtualNetworkInterfaceRequirements0..N

Specifies requirements on a virtual network interface realising the CPs instantiated from this CPD.

NOTE: In case of referencing an intCpd via its identifier, the virtualNetworkInterfaceRequirements attribute of the referenced intCpd applies
String1Human readable description of the DF.support: MANDATORY
(inherited attributes)All attributes inherited from Cpd.

Class: VduProfile

Uniquely identifies a VDUminNumberOfInstancesIntegerMinimum number of instances of the VNFC based on this VDU that is permitted to exist for
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

vduId

Identifier (Reference to Vdu)

1

vduProfileVduProfile1..NDescribes additional instantiation data for the VDUs used in this flavor.support: MANDATORY
virtualLinkProfileVirtualLinkProfile0..N

Defines the internal VLD along with additional data which is used in this DF.

NOTE 1: This allows for different VNF internal topologies between DFs.

NOTE 2: virtualLinkProfile needs to be provided for all VLs that the CPs of the VDUs in the VDU profiles connect to.

support: MANDATORY
instantiationLevelInstantiationLevel1..N

Describes the various levels of resources that can be used to instantiate the VNF using this flavour.

support: MANDATORY

maxNumberOfInstances

Integer

1

Maximum number of instances of the VNFC based on this VDU that is permitted to exist for this flavour

Examples: Small, Medium, Large.

If there is only one "instantiationLevel" entry, it shall be treated as the default instantiation level for this DF.

support: MANDATORY
localAffinityOrAntiAffinityRuleaffinityOrAntiAffinityGroupLocalAffinityOrAntiAffinityRuleAffinityOrAntiAffinityGroup0..N

Specifies affinity or anti-affinity

rules

relationship applicable between the virtualisation containers (e.g. virtual machines) to be created

based on this VDU.

When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes (e.g. "Affinity with the scope resource zone and anti-affinity with the scope NFVI node") are applicable to the virtualisation containers (e.g. virtual machines) to be created based on this VDU.

support: MANDATORY

affinityOrAntiAffinityGroupIdIdentifier0..N

Identifier(s) of the using different VDUs or internal VLs to be created using different VnfVirtualLinkDesc(s) in the same affinity or anti-affinity group.

NOTE: In the present specification, including either VDU(s) or VnfVirtualLinkDesc(s) the VDU belongs to.NOTE: Each identifier references an into the same affinity or anti-affinity group which expresses group is supported. Extension to support including both VDU(s) and VnfVirtualLinkDesc(s) into the same affinity or anti-affinity relationships between the virtualisation container(s) (e.g. virtual machine(s)) to be created using this VDU and the virtualisation container(s) (e.g. virtual machine(s)) to be created using other VDU(s) in the same groupgroup is left for future specification.

support:

MANDATORY

scalingAspectScalingAspect0..NThe scaling aspects supported by this DF of the VNF. scalingAspect shall be present if the VNF supports scaling.

support:

MANDATORY

Class: VirtualLinkProfile

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

vnfVirtualLinkDescId

Identifier (Reference to VnfVirtualLinkDesc)

1

Uniquely identifies a Vnf VLD.

support: MANDATORY
watchdogString0..1Watchdog action to be triggered by the VIM for the VNF in case the heart beat fails, e.g. reset or hard shutdown, etcflavourIdIdentifier (Reference to VirtualLinkDescFlavour)1Identifies a flavour within the VnfVirtualLinkDesc.support: MANDATORYvmBootUpTimeOut
IntegerlocalAffinityOrAntiAffinityRuleLocalAffinityOrAntiAffinityRule0..1Timeout value for the VNFM to wait before the successful booting up of the VDU.N

Specifies affinity or anti-affinity rules applicable between the VLs based on this VnfVirtualLinkDesc.

When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes are applicable to the VLs based on this VnfVirtualLinkDesc.

support: OPTIONALMANDATORY

Class: VirtualNetworkInterfaceRequirements

Provides a human readable name for the requirementdescriptionString0..Provides a human readable description of the requirement
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

name

String

0..1

affinityOrAntiAffinityGroupIdIdentifier0..N

Identifier(s) of the affinity or anti-affinity group(s) the VnfVirtualLinkDesc belongs to.

NOTE: Each identifier references an affinity or anti-affinity group which expresses affinity or anti-affinity relationship between the VL(s) using this VnfVirtualLinkDesc and the VL(s) using other VnfVirtualLinkDesc(s) in the same group.

support: MANDATORY
maxBitRateRequirementsLinkBitrateRequirements1

Specifies the maximum bitrate requirements for a VL instantiated according to this profile.

NOTE: These attributes are used to control scaling boundaries.

support: MANDATORY
supportMandatoryminBitRateRequirementsBooleanLinkBitrateRequirements1Indicates whether fulfilling the constraint is mandatory (TRUE) for successful operation or desirable (FALSE)

Specifies the minimum bitrate requirements for a VL instantiated according to this profile.

support: MANDATORY
networkInterfaceRequirementsinitiationParametersKeyValuePair/NameValuePair0..NThe network interface requirements. An element from an array of key-value pairs that articulate the network interface deployment requirementsSpecifies initiation parameters for the virtual link.

support: MANDATORY

Class: VnfVirtualLinkDesc

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

virtualLinkDescId

Identifier

1

Unique identifier of this internal VLD in VNFD.

support: MANDATORY
virtualLinkDescFlavourVirtualLinkDescFlavour1..NDescribes a specific flavour of the VL with specific bitrate requirements.support: MANDATORY
connectivityTypeConnectivityType1

valueRange: specified values include: cidr, allocationPools (represented by [starting ip address, ending ip address]), gatewayIp, networkName, segmentationId, physicalNetwork.


networkTypeEnum0..1Type of the network.

support: MANDATORY

valueRange: "VLAN", "VXLAN"

dhcpEnabledBoolean0..1Indicating whether DHCP is enabled. Default is "FALSE" if not specified otherwise.support: MANDATORY
testAccessvlanTransparentStringBoolean0..NSpecifies test access facilities expected on the VL (e.g. none, passive monitoring, or active (intrusive) loopbacks at endpoints)1Indicating whether "VLAN Transparent Mode" is supported. Default is "FALSE" if not specified otherwise.support: MANDATORYdescriptionString0..1Provides human-readable information on the purpose of the VL (e.g. control plane traffic)

Class: VirtualLinkDescFlavour

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

flavourId

Identifier

1

Identifies a flavour within a VnfVirtualLinkDesc.

support: MANDATORY
monitoringParameterqosMonitoringParameterQoS0..N1Defines the virtualised resources monitoring parameters on VLD level. QoS of the VL.support: MANDATORY

Class:

...

LinkBitrateRequirements

Human readable description of the DF

Defines the internal VLD along with additional data which is used in this DF.

NOTE 1: This allows for different VNF internal topologies between DFs.

NOTE 2: virtualLinkProfile needs to be provided for all VLs that the CPs of the VDUs in the VDU profiles connect to
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

flavorId

Identifier

1

Identifier of this DF within the VNFD.

support: MANDATORY
descriptionString1MultiplicityDescriptionApplied Stereotypes

root

Number

1

Throughput requirement of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).

support: MANDATORY
leafNumber0..1

Throughput requirement of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E?LAN branches).

NOTE: The present document does not specify the means to declare different bitrate requirements for leaf connections (e.g. E-LAN leaves).

support: MANDATORY
vduProfileVduProfile1..NDescribes additional instantiation data for the VDUs used in this flavor.support: MANDATORY
virtualLinkProfileVirtualLinkProfile0..N

Class: InstantiationLevel

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

levelId

Identifier

1

Uniquely identifies a level with the DF.

support: MANDATORY
instantiationLeveldescriptionInstantiationLevelString1..N

Describes the various levels of resources that can be used to instantiate the VNF using this flavour.

Examples: Small, Medium, Large.

If there is only one "instantiationLevel" entry, it shall be treated as the default instantiation level for this DF
Human readable description of the level.support: MANDATORY
vduLevelVduLevel1..NIndicates the number of instance of this VDU to deploy for this level.support: MANDATORY
affinityOrAntiAffinityGroupvirtualLinkBitRateLevelAffinityOrAntiAffinityGroupVirtualLinkBitRateLevel0..N

Specifies affinity or anti-affinity relationship applicable between the virtualisation containers (e.g. virtual machines) to be created using different VDUs or internal VLs to be created using different VnfVirtualLinkDesc(s) in the same affinity or anti-affinity groupbitrate requirements applicable to virtual links created from particular virtual link descriptors for this level.

ScalingAspect

NOTE: In the If not present specification, including either VDU(s) or VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is supported. Extension to support including both VDU(s) and VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is left for future specification.

support:

MANDATORY

scalingAspect

, it is assumed that the bitrate requirements can be derived from those specified in the VduCpd instances applicable to the internal VL. If present in both the InstantiationLevel and the VduCpd instances applicable to the internal VL, the highest value takes precedence.

support: MANDATORY
scaleInfoScaleInfo0..NThe scaling aspects supported by this DF of the VNF. scalingAspect Represents for each aspect the scale level that corresponds to this instantiation level. scaleInfo shall be present if the VNF supports scaling.support: MANDATORY

Class:

...

ScaleInfo

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

vnfVirtualLinkDescIdaspectId

Identifier (Reference to

VnfVirtualLinkDesc

ScalingAspect)

1

Uniquely identifies a Vnf VLDReference to the scaling aspect.

support: MANDATORYflavourIdIdentifier (Reference to VirtualLinkDescFlavour)1
Identifies a flavour within the VnfVirtualLinkDescscaleLevelInteger1The scale level, greater than or equal to 0.support: MANDATORYlocalAffinityOrAntiAffinityRuleLocalAffinityOrAntiAffinityRule0..N

Specifies affinity or anti-affinity rules applicable between the VLs based on this VnfVirtualLinkDesc.

When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes are applicable to the VLs based on this VnfVirtualLinkDesc

Class: VduLevel

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

vduId

Identifier (Reference to Vdu)

1

Uniquely identifies a VDU.

support: MANDATORY
affinityOrAntiAffinityGroupIdnumberOf InstancesIdentifier0..N

Identifier(s) of the affinity or anti-affinity group(s) the VnfVirtualLinkDesc belongs to.

NOTE: Each identifier references an affinity or anti-affinity group which expresses affinity or anti-affinity relationship between the VL(s) using this VnfVirtualLinkDesc and the VL(s) using other VnfVirtualLinkDesc(s) in the same group.

support: MANDATORYmaxBitRateRequirementsLinkBitrateRequirements1

Specifies the maximum bitrate requirements for a VL instantiated according to this profile.

NOTE: These attributes are used to control scaling boundariesInteger
1Number of instances of VNFC based on this VDU to deploy for an instantiation level or for a scaling delta.support: MANDATORY

Class: QoS

Indicating whether DHCP is enabled. Default is "FALSE" if not specified otherwise
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

latency

Number

1

Maximum latency in ms.

support: MANDATORY
minBitRateRequirementspacketDelayVariationLinkBitrateRequirements1Specifies the minimum bitrate requirements for a VL instantiated according to this profileNumber1Maximum jitter in ms.support: MANDATORY
initiationParameterspacketLossRatioKeyValuePair/NameValuePairNumber0..NSpecifies initiation parameters for the virtual link1Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists.support: MANDATORY

valueRange: specified values include: cidr, allocationPools (represented by [starting ip address, ending ip address]), gatewayIp, networkName, segmentationId, physicalNetwork.

networkTypeEnum0..1Type of the network.

support: MANDATORY

valueRange: "VLAN", "VXLAN"

dhcpEnabledBoolean0..1

Class: LocalAffinityOrAntiAffinityRule

Indicating whether "VLAN Transparent Mode" is supported. Default is "FALSE" if not specified otherwise
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

type

Enum

1

Specifies whether the rule is an affinity rule or an anti-affinity rule.

support: MANDATORY

vlanTransparentBoolean0..1

valueRange: "Affinity", "Anti-Affinity"

scopeEnum1Specifies the scope of the rule.

support: MANDATORY

valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node"

Class:

...

AffinityOrAntiAffinityGroup

QoS of the VL
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

flavourIdgroupId

Identifier

1

Identifies a flavour within a VnfVirtualLinkDesc.

support: MANDATORYqosQoS0..1

an affinity or anti-affinity group to which the affinity or anti-affinity rule applies.

support: MANDATORY

Class: LinkBitrateRequirements

NumberThroughput requirement of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN)
Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

root

typeEnum1Specifies whether the rule is an affinity rule or an anti-affinity rule.

support: MANDATORY

leafNumber0..1

Throughput requirement of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E?LAN branches).

NOTE: The present document does not specify the means to declare different bitrate requirements for leaf connections (e.g. E-LAN leaves).

support: MANDATORY

...

valueRange: "Affinity", "Anti-Affinity"

scopeEnum1Specifies the scope of the rule.

support: MANDATORY

valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node"

Class: AddressData

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

levelId

Identifier

1

Uniquely identifies a level with the DF.

support: MANDATORYdescriptionString1Human readable description of the level

addressType

Identifier

1

Describes the type of the address to be assigned to the CP instantiated from the parent CPD. The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD.

support: MANDATORY

l2AddressData

Not Specified

NOTE: need to be specifed

0..1

Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD.

Shall be present when the addressType is MAC address.

support: MANDATORY

vduLevel
l3AddressData
VduLevel
L3AddressData
1
0..
NIndicates the number of instance of this VDU to deploy for this level
1

Provides the information on the IP addresses to be assigned to the CP instantiated from the parent CPD.

Shall be present when the addressType is IP address.

support: MANDATORY

virtualLinkBitRateLevelVirtualLinkBitRateLevel0..N

Specifies bitrate requirements applicable to virtual links created from particular virtual link descriptors for this level.

NOTE: If not present, it is assumed that the bitrate requirements can be derived from those specified in the VduCpd instances applicable to the internal VL. If present in both the InstantiationLevel and the VduCpd instances applicable to the internal VL, the highest value takes precedence

Class: L3AddressData

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

iPAddressAssignment

Boolean

1

Specify if the address assignment is the responsibility of management and orchestration function or not.

If it is set to True, it is the management and orchestration function responsibility.

support: MANDATORY

scaleInfo
floatingIpActivated
ScaleInfo0..NRepresents for each aspect the scale level that corresponds to this instantiation level. scaleInfo shall be present if the VNF supports scalingAttribute NameTypeMultiplicityDescriptionApplied Stereotypes

aspectId

Identifier (Reference to ScalingAspect)

1

Reference to the scaling aspect
Boolean1Specify if the floating IP scheme is activated on the CP or not.

support: MANDATORY

Class: ScaleInfo

iPAddressTypeEnum0..1

Define address type.

NOTE: The address type should be aligned with the address type supported by the layerProtocol attribute of the parent Cpd.

support: MANDATORY

scaleLevel

valueRange: "IPv4", "IPv6"

numberOfIpAddressInteger
1The scale level, greater than or equal to 0
0..1Minimum number of IP addresses to be assigned based on this L3AddressData information element.

support: MANDATORY

Class:

...

CpProtocolData

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

vduId

Identifier (Reference to Vdu)

1

Uniquely identifies a VDU

associatedLayerProtocol

Enum

1

One of the values of the attribute layerProtocol of the Cpd IE.

support: MANDATORY

numberOf Instances
addressData
Integer1Number of instances of VNFC based on this VDU to deploy for an instantiation level or for a scaling delta
AddressData0..NProvides information on the addresses to be assigned to the CP(s) instantiated from the CPD.

support: MANDATORY

Class:

...

ConnectivityType

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

latency

Number

1

Maximum latency in ms

layerProtocol

Enum

1

Identifies the protocol this VL gives access to (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire).

support: MANDATORY

flowPatternString0..1Identifies the flow pattern of the connectivity (Line, Tree, Mesh).

support: MANDATORY

packetDelayVariationNumber1Maximum jitter in ms.support: MANDATORYpacketLossRatioNumber

Class: VirtualCpuPinningData

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

virtualCpuPinningPolicy

Enum

0..1

Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists.support: MANDATORY

Class: LocalAffinityOrAntiAffinityRule

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

type

Enum

1

Specifies whether the rule is an affinity rule or an anti-affinity rule

The policy can take values of "static" or "dynamic". In case of "static" the virtual CPU cores are requested to be allocated to logical CPU cores according to the rules defined in virtualCpuPinningRules. In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g.: SMT (Simultaneous Multi-Threading) requirements).

support: MANDATORY

valueRange: "

Affinity

static", "

Anti-Affinity

dynamic"

scopeEnum1Specifies the scope of the rule

virtualCpuPinningRule

Not specified

NOTE: need to be specified

0..1A list of rules that should be considered during the allocation of the virtual CPUs to logical CPUs in case of "static" virtualCpuPinningPolicy.

support: MANDATORY

valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node"

Class:

...

groupId

...

Identifier

...

1

...

RequestedAdditionalCapabilityData

Attribute NameTypeMultiplicityDescriptionApplied Stereotypes

requestedAdditionalCapabilityName

String

1

Identifies a requested additional capability for the VDU.

support: MANDATORY

valueRange: For acceleration capabilities, reference to ETSI GS NFV-IFA 002.

supportMandatory

Boolean

1Indicates whether the requested additional capability is mandatory for successful operation.

support: MANDATORY

type
minRequestedAdditionalCapabilityVersion
Enum
String0..1
Specifies whether the rule is an affinity rule or an anti-affinity rule
Identifies the minimum version of the requested additional capability.

support: MANDATORY

valueRange: "Affinity", "Anti-Affinity"

scopeEnum1Specifies the scope of the rule
preferredRequestedAdditionalCapabilityVersionString0..1Identifies the preferred version of the requested additional capability.support: MANDATORY
valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node"
targetPerformanceParametersKeyValuePair1..NIdentifies specific attributes, dependent on the requested additional capability type.support: MANDATORY