...
Step 9. Open /service//vfc/nfvo/lcm/lcm/pub/config/config.py in vfc_nslcm container and change AAI_BASE_URL = "http://10.0.14.1:80/aai/v11"
Step 10. Update file basemodel.py in vfc_catalog container with the version from master branch
/service/vfc/nfvo/catalog/catalog/pub/utils/toscaparser/basemodel.py (See R1 Known Issues issue 1)
...
| Code Block |
|---|
root@3511e71899bc:/service/vfc/nfvo/catalog/catalog/pub/config# diff config.py config.py.orig 52,54c52,54 < SDC_BASE_URL = "http://10.0.14.1:80/api" < SDC_USER = "aai" < SDC_PASSWD = "Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U" --- > SDC_BASE_URL = "https://127.0.0.1:8443/api" > SDC_USER = "SDC" > SDC_PASSWD = "SDC" |
Step 11-2. Validate Change msb -ip and sdnc - ip and port in /etc/mso/config.d/topology.properties are correct oam ips ip and port in SO container testlab_mso_1 (TODO: if this is correct, remove this step)
| Code Block |
|---|
root@mso:/etc/mso/config.d# diff topology.properties topology.properties.orig
19,22c19,22
< msb-ip=10.0.14.1
< msb-port=80
< sdnc-ip=10.0.7.1
< sdnc-port=8282
---
> msb-ip=127.0.0.1
> msb-port=8080
> sdnc-ip=172.30.3.38
> sdnc-port=8282
|
Step 12. Configure MockServer to simulate SDN controller and VNFM driver
...