| Table of Contents |
|---|
...
Download the OOM project to the kubernetes master and run config
Code Block git clone -b master https://gerrit.onap.org/r/p/oom.git cd oom/kubernetes/config/ cp onap-parameters-sample.yaml onap-parameters.yaml ./createConfig.sh -n onap
Make sure the onap config pod completed
Code Block [centos@server-k8s-cluser-deploy1-kubernetes-master-host-jznn7y config]$ kubectl get pod --all-namespaces -a NAMESPACE NAME READY STATUS RESTARTS AGE kube-system etcd-server-k8s-cluser-deploy1-kubernetes-master-host-jznn7y 1/1 Running 0 3h kube-system kube-apiserver-server-k8s-cluser-deploy1-kubernetes-master-host-jznn7y 1/1 Running 0 3h kube-system kube-controller-manager-server-k8s-cluser-deploy1-kubernetes-master-host-jznn7y 1/1 Running 0 3h kube-system kube-dns-545bc4bfd4-9gm6s 3/3 Running 0 3h kube-system kube-proxy-46jfc 1/1 Running 0 3h kube-system kube-proxy-cmslq 1/1 Running 0 3h kube-system kube-proxy-pglbl 1/1 Running 0 3h kube-system kube-proxy-sj6qj 1/1 Running 0 3h kube-system kube-proxy-zzkjh 1/1 Running 0 3h kube-system kube-scheduler-server-k8s-cluser-deploy1-kubernetes-master-host-jznn7y 1/1 Running 0 3h kube-system tiller-deploy-5458cb4cc-ck5km 1/1 Running 0 3h kube-system weave-net-7z6zr 2/2 Running 0 3h kube-system weave-net-bgs46 2/2 Running 0 3h kube-system weave-net-g78lp 2/2 Running 1 3h kube-system weave-net-h5ct5 2/2 Running 0 3h kube-system weave-net-ww89n 2/2 Running 1 3h onap config 0/1 Completed 0 1mNote: Currently OOM development is basend on Rancher Environment. Some config setting is not good for this K8S cluster.
In [oom.git] / kubernetes / aai / values.yaml and [oom.git] / kubernetes / policy / values.yaml
There is a constant Cluster IP. aaiServiceClusterIp: 10.43.255.254
However this Cluster IP is not is the CIDR range for this cluster.
Change it to 10.100.255.254
In [oom.git] / kubernetes / sdnc / templates / nfs-provisoner-deployment.yaml
The nfs-provisoner will create a volumes mount to /dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/data
51 volumes:
52 - name: export-volume
53 hostPath:
54 path: /dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/data
In this K8s cluster the /dockerdata-nfs is already mounted to sync the config data between working nodes.
That will cause error in nfs-procisoner container
Change the code to- path:/dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/data+ path:/nfs-provisioner/{{ .Values.nsPrefix }}/sdnc/data+type: DirectoryOrCreate
- Upload the ONAP-helm TOSCA to Cloudify Manager GUI
The code is under review :https://gerrit.onap.org/r/#/c/27751/
Zip the helm derectory, and upload it to Cloudify Manager GUI
- Create depolyment
Fill in the deployment name and kubernetes master floating IP.
- Exectue Install workflow
Deployments → ONAP-tets→ Execute workflow→ Install
Results:
...
https://github.com/cloudify-examples/cloudify-environment-setup
"Install Cloudify CLI. Make sure that your CLI is using a local profile. (You must have executed cfy profiles use local in your shell."
links to http://docs.getcloudify.org/4.1.0/installation/from-packages/
switch to community tab
click DEB - verify you are human - fill out your name, email and company - get cloudify-cli-community-17.12.28.deb
scp the file up to your vm
| Code Block |
|---|
obrienbiometrics:_deployment michaelobrien$ scp ~/Downloads/cloudify-cli-community-17.12.28.deb ubuntu@cloudify.onap.info:~/ cloudify-cli-community-17.12.28.deb 39% 17MB 2.6MB/s 00:09 ETA obrienbiometrics:_deployment michaelobrien$ ssh ubuntu@cloudify.onap.info ubuntu@ip-172-31-19-14:~$ sudo su - root@ip-172-31-19-14:~# cp /home/ubuntu/cloudify-cli-community-17.12.28.deb . root@ip-172-31-19-14:~# sudo dpkg -i cloudify-cli-community-17.12.28.deb Selecting previously unselected package cloudify. (Reading database ... 51107 files and directories currently installed.) Preparing to unpack cloudify-cli-community-17.12.28.deb ... You're about to install Cloudify! Unpacking cloudify (17.12.28~community-1) ... Setting up cloudify (17.12.28~community-1) ... Thank you for installing Cloudify! |
Configure the CLI
| Code Block |
|---|
root@ip-172-31-19-14:~# cfy profiles use local Initializing local profile ... Initialization completed successfully Using local environment... Initializing local profile ... Initialization completed successfully |
Download the archive
| Code Block |
|---|
wget https://github.com/cloudify-examples/cloudify-environment-setup/archive/latest.zip root@ip-172-31-19-14:~# apt install unzip root@ip-172-31-19-14:~# unzip latest.zip creating: cloudify-environment-setup-latest/ inflating: cloudify-environment-setup-latest/README.md inflating: cloudify-environment-setup-latest/aws-blueprint.yaml inflating: cloudify-environment-setup-latest/azure-blueprint.yaml inflating: cloudify-environment-setup-latest/circle.yml inflating: cloudify-environment-setup-latest/gcp-blueprint.yaml creating: cloudify-environment-setup-latest/imports/ inflating: cloudify-environment-setup-latest/imports/manager-configuration.yaml creating: cloudify-environment-setup-latest/inputs/ inflating: cloudify-environment-setup-latest/inputs/aws.yaml inflating: cloudify-environment-setup-latest/inputs/azure.yaml inflating: cloudify-environment-setup-latest/inputs/gcp.yaml inflating: cloudify-environment-setup-latest/inputs/openstack.yaml inflating: cloudify-environment-setup-latest/openstack-blueprint.yaml creating: cloudify-environment-setup-latest/scripts/ creating: cloudify-environment-setup-latest/scripts/manager/ inflating: cloudify-environment-setup-latest/scripts/manager/configure.py inflating: cloudify-environment-setup-latest/scripts/manager/create.py inflating: cloudify-environment-setup-latest/scripts/manager/delete.py inflating: cloudify-environment-setup-latest/scripts/manager/start.py |
Configure the archive with your AWS credentials
- vpc_id: This is the ID of the vpc. The same vpc that your manager is attached to.
- private_subnet_id: This is the ID of a subnet that does not have inbound internet access on the vpc. Outbound internet access is required to download the requirements. It must be on the same vpc designated by VPC_ID.
- public_subnet_id: This is the ID of a subnet that does have internet access (inbound and outbound). It must be on the same vpc designated by VPC_ID.
- availability_zone: The availability zone that you want your instances created in. This must be the same as your public_subnet_id and private_subnet_id.
- ec2_region_endpoint: The AWS region endpint, such as ec2.us-east-1.amazonaws.com.
- ec2_region_name: The AWS region name, such as ec2_region_name.
- aws_secret_access_key: Your AWS Secret Access Key. See here for more info. This may not be provided as an environment variable. The string must be set as a secret.
- aws_access_key_id: Your AWS Access Key ID. See here for more info. This may not be provided as an environment variable. The string must be set as a secret.
Install the archive
| Code Block |
|---|
# I am on AWS EC2 root@ip-172-31-19-14:~# cfy install cloudify-environment-setup-latest/aws-blueprint.yaml -i cloudify-environment-setup-latest/inputs/aws.yaml --install-plugins --task-retries=30 --task-retry-interval=5 Initializing local profile ... Initialization completed successfully Initializing blueprint... #30 sec Collecting https://github.com/cloudify-incubator/cloudify-utilities-plugin/archive/1.4.2.1.zip (from -r /tmp/requirements_whmckn.txt (line 1))2018-01-13 15:28:40.563 CFY <cloudify-environment-setup-latest> [cloudify_manager_ami_i29qun.create] Task started 'cloudify_awssdk.ec2.resources.image.prepare' 2018-01-13 15:28:40.639 CFY <cloudify-environment-setup-latest> [vpc_w1tgjn.create] Task failed 'cloudify_aws.vpc.vpc.create_vpc' -> EC2ResponseError: 401 Unauthorized <?xml version="1.0" encoding="UTF-8"?> <Response><Errors><Error><Code>AuthFailure</Code><Message>AWS was not able to validate the provided access credentials</Message></Error></Errors><RequestID>d8e7ff46-81ec-4a8a-8451-13feef29737e</RequestID></Response> 2018-01-13 15:28:40.643 CFY <cloudify-environment-setup-latest> 'install' workflow execution failed: Workflow failed: Task failed 'cloudify_aws.vpc.vpc.create_vpc' -> EC2ResponseError: 401 Unauthorized <?xml version="1.0" encoding="UTF-8"?> <Response><Errors><Error><Code>AuthFailure</Code><Message>AWS was not able to validate the provided access credentials</Message></Error></Errors><RequestID>d8e7ff46-81ec-4a8a-8451-13feef29737e</RequestID></Response> Workflow failed: Task failed 'cloudify_aws.vpc.vpc.create_vpc' -> EC2ResponseError: 401 Unauthorized <?xml version="1.0" encoding="UTF-8"?> <Response><Errors><Error><Code>AuthFailure</Code><Message>AWS was not able to validate the provided access credentials</Message></Error></Errors><RequestID>d8e7ff46-81ec-4a8a-8451-13feef29737e</RequestID></Response> |
I forgot to add my AWS auth tokens - editing....rerunning
Multi VIM: Amazon AWS EC2 + Microsoft Azure VM
...