TODO: update/link Running the ONAP Demos
...
- Fixing the External IP Address issue with vFW VM.
TODO :20171128
- To Check the sanity of vFW Demo VM To Conclude Cloud-Config.json for using MultiCloud for creating the Vf Module .
- check whether all the 3 VM of vFW i.e TrafficGenerator VM , Sink and Firewall VM can be logged inFixing the External IP Address issue with vFWCL VM's ..
- what are the other command to verify vFW Demo post able to login into all the 3 VM's .
To Do
try check in the browser < private IP address of Sink VM :667 > and check if the Graph are displayed .- Is there similar splitting applicable to vLB/vDNS similar to vFWCL package .
This page aims to capture all the information , challenges and troubleshooting tricks to run vFWCL Demo successfully . This page assumes that you should have
- successfully deployed Openstack/VIO Successfully in a Multi Node Environment .
- Firewall Rules on Horizon dashboard has been setup to allow SSH , HTTP, HTTPS .
- Ports 10001 to 10005 towards Open Internet have been Open if your environment is behind a proxy.
running vFW Demo requires two workFlow .vFW Onboarding and vFW Instantation .
a. There are important Point that should be taken care
looks Like vFW the default key overriding is not working across board .
This page aims to capture all the information , challenges and troubleshooting tricks to run vFW Demo successfully via Robot Framework i.e Robot VM. This page assumes that you should have
- successfully deployed Openstack/VIO Successfully in a Multi Node Environment .
- Firewall Rules on Horizon dashboard has been setup to allow SSH , HTTP, HTTPS .
- Ports 10001 to 10005 towards Open Internet have been Open if your environment is behind a proxy.
running vFW Demo requires two workFlow .vFW Onboarding and vFW Instantation .vFW a.1 use vFWCL Zip images only because vFW has been spiltted into 2 packages for Amsterdam release older vFW Does not work .
a.2 Robot VM and demo.sh init can not be used for distributing vFWCL services because Robot has not been evolved to init and distribute the Split fireall vFWCl,
a.3 All the 3 VM's as a part of vFW should have external network attached to them since these VM's download some data from External /Open Internet .
a.4 try check in the browser < private IP address of Sink VM :667 > and check if the Graph are displayed .
vFW Oboarding is step4 to step12 . Post vFW/Service Distribution the workFlow of vFW instantiation gets executed.
...
16.1 create the user if not created already .<sdnc_ip>:8843/signup
16.2 Once sign up done and then <sdnc_ip>:8843/login
16.3 Add VNF Profile , Important thing to Note is VNF Type to be filled in .
17 . uploading the VNF Topology JSON FIle using SDNC VNF API
17.1SDNC VM – login/password for the SDNC API Access .
username: admin
password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
17.2 Access <sdnc_ip>:8282/apidoc/explorer/index.html on the SDNC VM.
17.3 Click on VNF-API
17.4 Scroll down to the POST /operations/VNF-API:preload-vnf-topology-operation
17.5 filled JSON vFW Files from our environment
{
"input":
{
"request-information":
{
"notification-url":"openecomp.org",
"order-number":"1",
"order-version":"1",
"request-action":"PreloadVNFRequest",
"request-id": "robot20"
},
"sdnc-request-header":
{
"svc-action": "reserve",
"svc-notification-url": "http://openecomp.org:8080/adapters/rest/SDNCNotify",
"svc-request-id":"robot20"
},
"vnf-topology-information":
{
"vnf-assignments":
{
"availability-zones":[],
"vnf-networks":[],
"vnf-vms":[]
},
"vnf-parameters":
[
{"vnf-parameter-name":"vfw_private_ip_2","vnf-parameter-value": "10.0.100.4"},
{"vnf-parameter-name":"public_net_id","vnf-parameter-value": "87cdc31f-362f-4bdc-8b50-a7894ed759e9"},
{"vnf-parameter-name":"key_name","vnf-parameter-value":"onapviokey"},
{"vnf-parameter-name":"pub_key","vnf-parameter-value":"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC4CegUDC7k2bqru0KkQ2HzSXZMZJ0cJBizQkt82CZ4Z8RlLFbxNwYhcuI67zEEB3PeVGzw6xsDDo0Su9OT1DxzFsLy14yxWI7+4K0kv/FYKw0ULT7UrBi3sjZI+e65Y/YL7tSZxiPHnPSncBFhMqXZT+WpKJF3BPDIpzbgnvbTH0O1OOQPYmN63Z87Alu8abZKCkClwbdmfl1dnEUoIve1/0f8jZTMC/qO1mQt04s59V7HNQyykZ6POSItH/cgjy3HI7e7gr8E/MseK/LOGu0mVPpcay/FcUKxI+u+sZ/GqY5+1nMQKKVnBWhc5P+cRoMMWjlNs7AiJmrnueAbNDLl Generated-by-Nova"},
{"vnf-parameter-name":"repo_url","vnf-parameter-value":"https://nexus.onap.org/content/sites/raw"}
],
"vnf-topology-identifier":
{
"service-type":"7a9ae3bc-caef-4200-a2f7-2afdbaa41e0d",
"generic-vnf-name":"demo4VFWVNF20",
"generic-vnf-type":"c38867a1-c1b8-422f-8808 0",
"vnf-name":"demo4VFWVNF20-1",
"vnf-type":"C38867a1C1b8422f8808..base_vfw..module-0"
}
}
}
}
17.6 filled JSON vLb Files from our environment
{
"input":
{
"request-information":
{
"notification-url":"openecomp.org",
"order-number":"1",
"order-version":"1",
"request-action":"PreloadVNFRequest",
"request-id": "robot20"
},
"sdnc-request-header":
{
"svc-action": "reserve",
"svc-notification-url": "http://openecomp.org:8080/adapters/rest/SDNCNotify",
"svc-request-id":"robot20"
},
"vnf-topology-information":
{
"vnf-assignments":
{
"availability-zones":[],
"vnf-networks":[],
"vnf-vms":[]
},
"vnf-parameters":
[
{"vnf-parameter-name":"public_net_id","vnf-parameter-value": "aa83b3d9-dda6-4106-b776-9280799993ce"},
{"vnf-parameter-name":"vfw_private_ip_2","vnf-parameter-value": "10.0.100.4"},
{"vnf-parameter-name":"vfw_image_name","vnf-parameter-value": "ubuntu_16.04"},
{"vnf-parameter-name":"key_name","vnf-parameter-value":"onapkey"},
{"vnf-parameter-name":"pub_key","vnf-parameter-value":"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC4CegUDC7k2bqru0KkQ2HzSXZMZJ0cJBizQkt82CZ4Z8RlLFbxNwYhcuI67zEEB3PeVGzw6xsDDo0Su9OT1DxzFsLy14yxWI7+4K0kv/FYKw0ULT7UrBi3sjZI+e65Y/YL7tSZxiPHnPSncBFhMqXZT+WpKJF3BPDIpzbgnvbTH0O1OOQPYmN63Z87Alu8abZKCkClwbdmfl1dnEUoIve1/0f8jZTMC/qO1mQt04s59V7HNQyykZ6POSItH/cgjy3HI7e7gr8E/MseK/LOGu0mVPpcay/FcUKxI+u+sZ/GqY5+1nMQKKVnBWhc5P+cRoMMWjlNs7AiJmrnueAbNDLl Generated-by-Nova"},
{"vnf-parameter-name":"repo_url","vnf-parameter-value":"https://nexus.onap.org/content/sites/raw"}
],
"vnf-topology-identifier":
{
"service-type":"7a9ae3bc-caef-4200-a2f7-2afdbaa41e0d",
"generic-vnf-name":"demo4VFWVNF10",
"generic-vnf-type":"c38867a1-c1b8-422f-8808 0",
"vnf-name":"demo4VFWVNF10-1",
"vnf-type":"C38867a1C1b8422f8808..base_vfw..module-0"
}
}
}
}
18. Go To Portal GUI and From VID - create VF Module
18.a SO↔VIM(Openstack/VIO) - This does not use Multi Cloud
...