...
| Test Case Id | V00009 |
| Test Case Name | vIMS Service Creation |
| Description | This test creates vIMS service |
| Release | Amsterdam |
| Preconditions | - All vIMS VNFD csar files can pass VNFSDK checking
- All vIMS VNFs have been onboarded
- All VNFs images files have been uploaded manually into ONAP
|
| Testing Steps | - In SDC create vIMS service with the following VNFs
- vPCSCF
- vI/SCSCF
- vTAS
- As part of vIMS service composition, create Virtual Links (VL) to connect the VNFs together according to vIMS service design
|
| Expected Results | - vIMS service is created successfully
- vnfmInfo is correctly pointed to vendor's SVNFM
- vIMS service is successfully stored in catalog
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Testing Date |
|
| Tester Name |
|
V00010: WAN Service Creation (need update - WAN service Resource Onboarding (WAN resource only has properties , but keep in template, need to confirm overlay and underlay services are seperate ?resources)
| Test Case Id | V00010 |
| Test Case Name | WAN Service CreationResource Onboarding |
| Description | This test creates onboards WAN service resource using SDC |
| Release | Amsterdam |
| Preconditions | - All PNFs (PE, DC gateway) resources have been defined in SDC
- All required network connection types (VLAN, BGP MPLS L3VPN, VXLAN, etc) are defined in SDCWAN underlay network template has been defined and packaged in a CSAR file
- WAN overlay network template has been defined and packaged in a CSAR file
|
| Testing Steps | - In SDC create a new WAN service
- In service composition, pull in 2 PE routers, namely PE1 and PE2
- In service composition, pull in 2 data center gateways, namely DC GW1 and DC GW2
- Create underlay network as following:
- DC GW1 → PE1 as vlan
- DC GW2 → PE2 as vlan
- PE1 → PE2 as BGP MPLS L3VPN
- Create overlay network DC GW1 → DC GW2 as VXLANonboard WAN underlay network CSAR file
- In SDC onboard WAN overlay network CSAR file
|
| Expected Results | - Underlay WAN underlay network created resource onboarded successfullyOverlay
- WAN overlay network created resource onboarded successfully
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Testing Date |
|
| Tester Name |
|
...
V00014: System Performance and Alarm Monitoring
| Test Case Id | V00014 |
| Test Case Name | System Performance and Alarm Monitoring |
| Description | This test uses Usecase UI GUI to monitor system performance and event |
| Release | Amsterdam |
| Preconditions | - VoLTE service has been instantiated
- Closed loop for VoLTE has been configured and started
|
| Testing Steps | - ONAP user uses Usecase UI GUI to check system performance, such as CPU, memory and disk usage
- ONAP user views the VNF alarms collected by ONAP
|
| Expected Results | - System performance (including system CPU, memory and disk usage) is shown on ONAP Usecase UI GUI
- VNF alarms, specified in CLAMP for the closed loop, are shown in Usecase UI GUI
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Testing Date |
|
| Tester Name |
|
Category: Closed Loop
V00015: VoLTE Auto-healing
...